PRODUCT DESCRIPTION

Saber Outboard (ATO) is specifically designed for outboard motors. It is also very good for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard contains a heavy dose of lower temperature dispersant additives that excel at preventing varnish and deposits from forming in watercooled motors. Saber Outboard is a very low smoke, low odor, low toxicity product that produces fewer emissions at 100:1 mix ratios than oils mixed at 50:1. It is formulated to prevent “oil loading” and plug fouling for rapid throttle response, making it ideal for trolling motors. Operators and the environment benefit from the use of Saber Outboard. It is recommended for pre-mix use where TC-W3 or API TC is specified.

Applications (see Two-Cycle Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

2.6 oz.	per 1 U.S. gallon	50:1
8 oz.	per 5 U.S. gallons	80:1
1.3 oz.	per 1 U.S. gallon	100:1
8 oz.	per 6 U.S. gallons	100:1

TYPICAL TECHNICAL PROPERTIES Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO)
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	17.9
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	141.2
Viscosity Index (ASTM D-2270)	141
Pour Point °C (°F) (ASTM D-97)	-33 (-27)
Flash Point °C (°F) (ASTM D-92)	120 (248)
Fire Point °C (°F) (ASTM D-92)	138 (280)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.