The Shamans Dream Flute Blanks

These blanks follow the ki-e-ta Manual measurements for a 3/4" bore or the 7/8" bore. The SAC, the bore, and the flue (see Nomenclature page) are routed in and the rest of the sanding,glueing, clamping, hole placements for tuning, SAC exit and finishing is left for the crafter to complete.

Drums

Type of wood	Bore width	Price per blank (Incl domestic S&H) Contact Mike for International shipping	Notes of interest
Poplar, Redwood, Western Cedar, Incense(pencil) Cedar	3/4" , 7/8"	$20.00	Good workable wood, beautiful results, common wood
Poplar (natural purple stained), Blue Pine (limited stock), Figured Redwood, Cedar	3/4", 7/8"	$25.00	Good workable wood, beautiful results, less common , with exquisite grain and figure.
Cherry, Walnut, Oak, Western Maple, Mahogany	3/4", 7/8"	$28.00	Hardwood that works nicely with sharp tools and produces excellent flutes
Exotics(please email for availability): Tiger, Birdseye, Quilted Maple; Leopardwood, Lacewood, Nara, Canarywood..many many others	3/4", 7/8"	$35.00 and up	Exotic Hardwood and semi-hardwood that produce spectacular looking finished flutes. Each type has its own requirements for how it must be handled and worked, but the results are well worth it!
"Big Bore" blanks (27" to 30")	1" 1 1/8" 1 1/4 "	add $5.00 to $25.00 (for added length)	Not all woods are readily available in the thickness and length to make big bores. Please allow for this when making a request, I will try to fullfill them.

Nomenclature

Contact Mike